Electric Actuator Bolted Bonnet Globe Valve

Through Way Globe Valve 1.Outside Screw and Yoke 2.Bolted Bonnet Globe Valve 3.Flange End 4.Electric actuator

Send Inquiry

Product Introduction

Electric actuator Bolted Bonnet Globe Valve, BW end

Globe valve is force sealed type. When valve is closed, disc shall be under ressure, to ensure the shutoff of sealing face.

DN50--PN200

PN100

Body: Cast Steel

Disc: 13Cr

Outside screw stem

Specification:

1. Small in size, light in weight, easy installation and maintenance.

2. Simple and compact construction, quick 90 degree on-off operation.

3. Minimized operating torque, energy saving.

4. Flow curve tending to straight line, excellent regulation performance.

5. Long service life, standing the test of tens thousands opening/closing operations.

6. Wide selection of materials, applicable to various medium.

Modulating Control Valve Globe Type

Installation and maintenance:

1. The pipe shall be clean and clean before valve installed.

2. Try to make the actuator face up. Notice the flow direction.

3. Connect the valve to the pipe, note the actuator need to be removed only if the user has a special request.

4. Before opening or repairing the globe valve, cut off the fluid and control the air source and reduce the pressure in the piping system.