Xhnotion Plastic Non Return Valve 10mm Cartridge Check Valve

Since its development, the company has become a professional provider of high-efficiency bolted bonnet gate valve, Slip On Flange, recirculation valve integrating R&D, production, sales and application solutions. Besides, customized orders are also available. We treat customers with our heart, and we have unifies quality standards. We are committed to achieving quality and service standards in all business areas and everywhere. Enterprises have a modern vision and take the market as the guide, solve the customer's worries.

Swing Check Valve with Cylinder, swing check valve with counter weight and cylinder, swing check valve with damp device used in non-corrosive media such as water suction system of power plant or thermal power plant, or other system, to prevent sudden reduction of pressure in steam turbine when steam turbine load is applied, steam in the extraction pipe and each heater reverse flow into steam turbine Causes the steam turbine to shatter and destroy the turbine generator. It will prevent the leakage of the heater system piping and close the water from the extraction steam. When the feed water heater is at a high water level, the pneumatic device components will be connected to the liquid. After counter-current signals, the turbines are quickly separated to provide maximum protection to the turbine or the pumping system.

Swing check valve with pneumatic actuator and pipe

Specifications:

Size: 20inch(DN500)

Pressure: 300LB(PN25)

Material: WCB

Connection: BW End

Operation: pneumatic actuator

Features:

1.Design, manufacture, and acceptance standards are ANSI B16.34, E101, or JB/T3595, and strength and sealing performance fully meets the requirements of the standard.

2.Vacuum test under vacuum condition, the whole life meets user requirements;

3.For different temperatures, the main material is carbon steel or high-temperature steel, and the sealing surface is surfacing hard alloy;

4.The valve flap is designed to be connected with the valve rod through the rocker and can be aligned with the sealing surface of the valve to ensure that the sealing surface is consistent;

5.The valve seat sealing surface is inclined at a certain angle to reduce the closing time, reduce the impact, and protect the safety of the equipment itself and the pipeline;

6.The valve is equipped with a damping weight, which can balance the dynamic torque of the closing part to prevent the occurrence of hammer.

7.The body cavity of the valve adopts a streamlined design, which has large circulation capacity and reduces valve resistance.

8.The actuator is a spring-return type cylinder or hydraulic cylinder, and is relatively independent of the action of the valve closing part. The failure of the actuator does not affect the action of the closing part;

9.The cylinder or the inner wall of the hydraulic cylinder is coated with a wear-resistant and corrosion-resistant layer, which can increase the life span, reduce the resistance of the movement, and make the valve flexible and reliable;

10.The closing part is opened with a limit mechanism to avoid damage caused by opening over position;

11.The actuator is equipped with the valve switch position signal output, valve open position local indication;

12.Targeted design can also be based on specific user requirements.

Our company strictly controls the quality, improves the product quality, and sets reasonable price based on the market. Xhnotion Plastic Non Return Valve 10mm Cartridge Check Valve has been widely praised by customers. Only if we have a strong enough team and professional technology can we guarantee our company's good and long-term development. We are able to customize the solutions according to your needs and we can easily pack it for you when you purchase.