Cast Iron Gear Operation Gate Valve with Bypass
Pressure: 2500LB (PN420)
Material: WC6
Trim: Stellite
Connection: BW End
Operation: Rotork Electric Actuator
Every single member from our higher effectiveness product sales staff values customers' requires and organization communication for Rising stem gate valve, Bolted Bonnet Globe Valve Flange End, bronze gate valve. Our management philosophy is refinement, specialization, humanization and scale. We have been committed to providing customers with the best products and the most intimate service! With the goal of growing together with our customers, we will redouble our efforts! We are able to also offer you with free of charge samples to meet your requirements.
Cast steel Gate Valve with pass-by, BW By-pass gate valve, By-pass Gate Valve, Rotork Electric actuator gate valve.
Cast steel Gate valves are primarily used for stop valves fully opened or fully closed. They are not normally considered for throttling purposes, but more for slurries, viscous fluids, etc. Valve with by-pass give less pressure difference between inlet and outlet. Gate valves usually have a minimum pressure drop when fully open, provide tight shut-off when fully closed, and remain relatively free of contamination buildup.
Specification:
Size: 14inch (DN350)
Pressure: 2500LB (PN420)
Material: WC6
Trim: Stellite
Connection: BW End
Operation: Rotork Electric Actuator
Feature:
1.Available with optional wedge structure
2.Available with optional position of by-pass
3.By-pass decreases pressure difference between inlet and outlet
4.renewable structure and long service time
Technical
Product Name: | WCB gate valve with by-pass valve | API 600 gate valve with pass by valve | Pressure seal gate valve with bypass | By-pass valve Gate Valve | gate valve with by pass valve |
Size: | 2inch to 48inch(DN50 to DN1200) | ||||
Pressure rating | 150LB to 2500LB (PN10 to PN160) | ||||
Material: | A216 WCB、WCC; A217 WC6、WC9、C5、C12、C12A、CA15、 A351 CF8、CF8M、CF3、CF3M, etc | ||||
End connection: | Flange End | BW end | SW | ||
Operation type | Hand wheel, Gear, Electric actuator, pneumatic actuator | ||||
Design Standards: | API 600 | ASME B16.34 | EN558-1 | ||
Face to Face: | ASME B16.10 | EN558-1 | |||
Test standard: | API6D, API598, EN12266-1 | ||||
Our mission is to produce and supply goods in superb quality to satisfy customers' needs in Cast Iron Gear Operation Gate Valve with Bypass area. We are committed to be the best and the most unique supplier and we hope to have opportunities to satisfy our customers around the world. We take products that cater to and meet customer needs as our responsibility, and have an independent research and development department to ensure that products continue to be updated. We will be pleased to give you a quotation upon receipt of one's detailed specifications.
You Might Also Like
Send Inquiry